Resources
How often each part of a Livermore building needs cleaning: a frequency chart
Each area of a workplace, from restrooms and breakrooms to lobbies, desks, floors and high ledges, set against how hard it is used, plus how to read the chart and when to shift a row.
Request a quoteCall (925) 718-0398

Frequency is set by area, not by building
Two rooms in the same building can need very different amounts of care. A restroom off a busy lobby is in use all day between visits, while a records room down the hall barely sees a footprint. Giving both the same schedule wastes time in one and shortchanges the other.
The chart below starts from that idea. Rows list the areas found in a typical Livermore workplace; columns step up from light to heavy use. Match a room to its row, choose how hard it works, and read across to a sensible starting rhythm. It sits alongside our scope of work guide, which explains how to write tasks down; this page answers the earlier question of how much attention each space deserves.
The chart
Light use means a small suite or a quiet back-office wing. Moderate use fits most offices with a full staff on a standard workday. Heavy use covers lobbies with steady visitors, shift operations, shared tenant floors and anywhere people eat on site.
| Part of the building | Lightly used | Moderately used | Heavily used |
|---|---|---|---|
| Restrooms | Every cleaning visit | Every visit, with stock checked each time | Every visit, plus porter checks while open |
| Breakroom and kitchenette | Every visit, counters and sink | Every visit, appliance fronts included | Every visit, plus daytime resets |
| Entrance and lobby | Every visit for floor and door glass | Every visit, mats vacuumed each time | Every visit, plus porter rounds |
| Desks and workstations | Weekly, clear surfaces only | Two or three visits a week | Every visit for shared desks |
| Conference rooms | Weekly reset | Every visit for tables and bins | Every visit, plus resets between bookings |
| Hard floor finish | Burnish monthly, recoat yearly | Burnish every two weeks, recoat twice a year | Burnish weekly, recoat quarterly |
| Carpet | Extraction once a year | Extraction twice a year, lanes sooner | Extraction quarterly in entries and corridors |
| High dusting and vents | Yearly | Every six months | Quarterly |
Reading a row
Treat each cell as a starting point for a walkthrough conversation, not a fixed rule. The rows that read “every visit” across all three columns are the ones that show use within a day: restrooms, breakrooms and entries. What changes from light to heavy use there is what happens between visits, which is where day or night porter coverage comes in.
The rows that change from column to column are the slower areas. Desks, meeting rooms and high surfaces collect use gradually, so a quiet suite can space them out while a busy floor brings them closer together. Floors and carpet sit on their own calendar entirely. Hard floor finish is stripped and refinished on a planned cycle, with recoats between and burnishing to hold the gloss. Carpet gets periodic extraction, with entries and main walkways reaching their turn first. We schedule both for evenings or weekends, giving treated surfaces time to dry before staff are back.
Interior glass falls between the two groups. Door glass and sidelights at the entrance are wiped on every visit, while partition glass and internal windows run weekly or on a rotation. Exterior windows are a separate job on their own schedule, covered on our commercial window cleaning page.
Mixed buildings need more than one column
Few buildings fit one column all the way down. An office with a busy front desk and a quiet upstairs wing reads the lobby and restroom rows from the heavy column and the desks and meeting rooms from the light one. A warehouse with a front office runs its staff restrooms and breakroom on the heavy column because shifts overlap, while the offices themselves sit in the middle. Coworking floors and shared tenant suites lean heavy almost everywhere, since desks change hands through the day.
Research buildings and labs often split the same way: carpeted offices and shared break areas follow the chart, while technical rooms follow the facility’s own rules on access. The recurring janitorial service page shows how those everyday rows turn into a nightly routine.
When to move a row to a different column
The chart is only as good as the level of use you pick, and that level shifts. Watch for these signals that an area belongs in a different column.
- Restroom supplies running out before the next visit: move toward heavier coverage or add a porter.
- Breakroom counters cluttered by midday: add daytime resets.
- Mud and grit tracked in during the winter rains: tighten entrance and carpet timing for the season.
- A new team, a second shift or a full return to the office: step desks and meeting rooms up a column.
- A wing left empty or a team moved to hybrid hours: step those rooms down.
- Traffic lanes dulling well ahead of schedule: bring the next floor or carpet treatment forward.
Small changes like these are routine. The visit plan follows how the rooms are used, so a row can move up or down a column as your building changes.
Turning the chart into a schedule
Start by marking the column for each row as you walk the building, then bring that marked chart to the walkthrough. It gives both sides a shared starting point and makes it easy to see where the routine needs to be heavier or lighter than a standard plan. From there the nightly rows become the core visit, the slower rows become weekly or rotating tasks, and the hard floor and carpet lines are dated on their own calendar.
To start, request a walkthrough through our quote form and note in Facility notes which areas you marked heavy. The written quote is built from what we see on that visit. Keep your marked copy afterward; months later it is a quick way to check whether the routine still matches the building.
A few useful answers
Common questions
What rhythm suits the restrooms in a busy office?
On every cleaning visit, whatever the building’s traffic. Busy buildings add porter checks during open hours so stock and tidiness hold up between visits.
Do desks need cleaning every night?
Not always. Shared and hot desks belong on every visit, while private desks in a quiet suite can be dusted weekly, with clear surfaces wiped and bins emptied as the routine sets.
How often do hard floors need refinishing?
Scrub and recoat once a year in quiet areas, twice a year in most offices and quarterly in busy entries, with burnishing between recoats and a full strip only when recoats stop restoring the finish.
Should cleaning frequency change with the seasons?
Yes, for entrances and carpet. The winter rains bring more mud and grit through the doors, so entry mats, lobby floors and the carpet just inside get closer attention in those months.
Can one building use different columns for different rooms?
Yes. Most do. A busy lobby and restrooms can sit in the heavy column while a quiet office wing stays in the light one, and the visit plan reflects that mix.
Resources
